A little before 9am this morning, I had a great conversation with a PCB Designer in Ireland while also talking to a designer in Georgia.  No, I wasn’t in Ireland or Georgia, and no it wasn’t over the phone.  Instead we typed back and forth in a private chat, courtesy UP Media’s Virtual PCB show currently underway. Virtual Trade Shows are rising in popularity and I fully expect to see them more often in the future.  But as with anything, there are benefits and drawbacks depending on your role and …

BANNOCKBURN, Ill., USA, February 4, 2010 — Complacency with having survived the trials of 2009 is a naïve posture that, in 2010, will lead to continued struggles warns Walt Custer. The noted industry analyst and president of Custer Consulting Group will join IPC Director of Market Research Sharon Starr for the “Global Business Outlook: Where Do We Go Next?” keynote session at IPC APEX EXPO on Wednesday, April 7 in Las Vegas.
“If a company hasn’t been planning for the recovery,” Custer says, “it has considerable catching up to …

Two weeks from now, in the heart of the Silicon Valley, many of the top design firms and printed circuit board professionals will be attending DesignCon 2010.  Held at the Santa Clara Convention Center from February 1st-4th, this show promises to be a very valuable event for many.  Already the line-up of exhibitors is impressive, with exhibitors ranging from small consulting firms such as The Bogatin Group, to large, multi-national companies like Tyco Electronics.   See the full list here.
I have spoken with several individuals in the last few weeks …

U.S. Consulates Help IPC APEX EXPO Exhibitors Reach Across Oceans and Borders to Develop Business and Partnerships

BANNOCKBURN, Ill., USA, December 18, 2009 — The U.S. Department of Commerce has chosen IPC APEX EXPOTM as one of a select group of U.S. trade shows to participate in its International Buyer Program (IBP) for 2010. The event, produced by IPC — Association Connecting Electronics Industries®, was chosen by a vote of U.S. embassies, consulates and commercial centers worldwide. One measure was the show’s appeal to overseas visitors. …

The printed circuit board (PCB) industry is vital to manufacturers of computing components, automotive parts, cellular phones, flat-screen television displays and other devices considered essential to our modern lifestyles.
In addition to a large number of PCB enterprises in Taiwan, many PCB operations are located in Jiangsu, Zhejiang and Guangdong provinces.
Among them are leading PCB makers earning hundreds of millions of dollars in annual revenues and employing thousands of workers.
They also spend huge sums on environmental protection, including the disposal of manufacturing wastes from production processes and everyday operations.
The major pollution …

Paving Roads with Old Circuit Boards
With an eye to recycling, circuit boards are being used in asphalt
By Mark Fischetti
Millions of printed circuit boards from discarded electronics are tossed into landfills every year. In addition to the volume of waste, the material can leach chemicals into the soil. As an alternative, researchers at Shanghai Jiao Tong University in China are finding various ways to reuse the panels, including as an additive in asphalt.
Xu Zhenming and his colleagues stripped the boards of all components, pulverized the remains into a powder and …

Today is an exciting day for HotPCB.com!  Today marks the first significant promotion of HotPCB.  We were fortunate enough to be contacted by Andy Shaughnessy, Editor of PCB Design 007, and asked to be a guest on the Shaughnessy Report, a weekly audio interview he conducts.   It was a great experience working with Andy, and you can find all of his interviews here. The title of the HotPCB interview is “Grad Brings Fresh Viewpoint to Industry”.  Be sure to check it out!

Altium Goes for the Masses
Breaking the EDA Mold… Again

by Kevin Morris, FPGA and Structured ASIC Journal

This week, Altium is introducing a new model for the purchase of electronic design tools, in an attempt to create a grass-roots revolution that will change the nature of the electronic design automation (EDA) market.  For the past several years, Altium has been marching to a different drummer – focusing on an integrated desktop design tool suite that spans the gamut of electronic design from system-level specification to board and …

Just as a boy becomes a man when he picks up his first BB Gun, so too have I entered the EMS Industry with the arrival of my first trade magazine addressed to my name.  Of course, I live by the motto of “go big or go home” and so it was only fitting that two would arrive, and that they would be the extent of today’s mail.
A little over a  month ago I applied for membership with IEEE and joined a variety of societies pertaining to my line of …

Small, R&D focused, high technology companies are comprised more and more of individuals who have a much stronger grasp and reliance upon social media.