Careers

Founded in 1980, Cirexx International, Inc. is an electronic solutions company offering PCB Layout, Fabrication, Assembly, Testing & Validation of high-reliability Flex, Rigid-Flex, RF/Microwave, HDI and Rigid Circuit Boards. Recognized as a time-technology leader, Cirexx offers a genuine Quick Turn service and provides a “one-stop-shop” and all in-house solution with 100% USA manufacturing.

QUALITY CONTROL MANAGER

KEY RESPONSIBILITIES
The Quality Control Manager will oversee the evaluation of finished product for quality and reliability and look for ways of improving the manufacturing process to ensure higher-quality products.
GENERAL NATURE OF WORK:
Ensure product meets acceptable quality standards. Assist in the development and implementation of quality control standards. Manage and coordinate the work of the Quality Control department.

EXPERIENCE REQUIREMENTS:
5 years’ experience in a quality control environment in the Printed Circuit Board Industry.

SKILLS, ABILITIES AND OTHER REQUIREMENTS:

  • Must be familiar with a variety of printed circuit board industry concepts, practices and procedures.
  • Must be familiar with ISO and AS9100 standards.
  • Must be able to lead and direct the work of others and work in a team environment.
  • Must be able to speak, read, write and understand English.
  • Must have excellent communication, analytical and organization skills.
  • Must have good computer and keyboard skills and be proficient in Microsoft Office Suite.
  • Must have 20/20 near vision with or without corrective lenses.
  • Must be able to read blue prints and specifications.
  • Must be able to use magnifying rings, microscopes and measuring reticles.
  • Must be a U.S. Person under the requirements of ITAR (International Traffic in Arms Regulations).

This position is regular full time exempt.

MANUFACTURING ENGINEER

KEY RESPONSIBILITIES:
The Manufacturing Engineer will drive improvements to the assembly operation; assist in SMT programming; write procedures; assist with job planning; prepare planning documents; review RMA’s and submit corrective actions. interface with customers and vendors.

GENERAL NATURE OF WORK:
The Manufacturing Engineer will provide support to the assembly operation to ensure ongoing product & process improvements to meet quality, continuous process improvement and production goals.

EDUCATION & KNOWLEDGE REQUIREMENT:
High School education. Should also possess a technical degree.

EXPERIENCE REQUIREMENTS:
2 years’ experience in an engineering capacity.

SKILLS, ABILITIES AND OTHER REQUIREMENTS:

  • Must be able to speak, read, write and understand English.
  • Must have excellent communication and interpersonal skills.
  • Must have good computer and keyboard skills and be proficient in Microsoft Office Suite.
  • Must be well organized, disciplined and self-motivated with the capability to balance multiple priorities.
  • Must be able to set priorities and meet deadlines.
  • Must be able to read blue prints, BOMS and specifications
  • Must be a U.S. Person under the requirements of ITAR (International Traffic in Arms Regulations).

This position is regular full time exempt.

SURFACE MOUNT TECHNICIAN

KEY RESPONSIBILITIES:
Assembly of printed circuit boards using SMT equipment, including screen printer, pick and place, and reflow oven.

GENERAL NATURE OF WORK:
Machine operation

EDUCATION & KNOWLEDGE REQUIREMENT:
Set-up, care, and operation of SMT machines. Knowledge of SMT components and techniques to assemble. Knowledge of solder pastes and flux materials.

EXPERIENCE REQUIREMENTS:
No experience

SKILLS, ABILITIES AND OTHER REQUIREMENTS:

  • Able to read, write, speak and understand English.
  • Manual dexterity required for feeder set-up.
  • Requires standing for the majority of the workday.
  • Requires good vision and hand dexterity to work with very small parts.
  • Able to work in team environment; pay attention to details; perform work accurately; follow directions.
  • This position requires U.S Citizenship or permanent residency to meet ITAR (International Traffic in Arms Regulation)

This position is regular full time non-exempt.

AOI OPERATOR

KEY RESPONSIBILITIES:
run AOI machine all aspects including programming.

GENERAL NATURE OF WORK:
See above.

EDUCATION & KNOWLEDGE REQUIREMENT:
High school or equivalent joib experience. Familiar with programming and operating AOI machine.

EXPERIENCE REQUIREMENTS:
2+ years of hands on experience with AOI operations.

SKILLS, ABILITIES AND OTHER REQUIREMENTS:

  • Able to read, write, speak and understand English.
  • Able to work in team environment; pay attention to details; perform work accurately; and follow directions.
  • Must have basic computer skills.
  • Must be able to stand for long periods of time.
  • This position requires U.S Citizenship or permanent residency to meet ITAR (International Traffic in Arms Regulation)

This position is regular full time non-exempt.

ASSEMBLY HAND SOLDER TECHNICIAN

KEY RESPONSIBILITIES:
Hands-on assembly and soldering of printed circuit boards.

GENERAL NATURE OF WORK:
See above.

EDUCATION & KNOWLEDGE REQUIREMENT:
High school education or equivalent job experience. Familiar with part removal techniques such as use of solder sucker and local hot air.

EXPERIENCE REQUIREMENTS:
2+ years of hands-on experience assembly or soldering circuit boards.

SKILLS, ABILITIES AND OTHER REQUIREMENTS:

  • Able to read, write, and understand English.
  • Familiar with surface mount components and assembly documentation including bill of material.
  • Must have 20/20 vision with or without corrective lenses.
  • Must be able to use a lighted magnifier and microscope.
  • Able to solder/install surface mount parts down to 0402 size.
  • Able to work in team environment; pay attention to details; perform work accurately and follow directions.
  • This position requires U.S Citizenship or permanent residency to meet ITAR (International Traffic in Arms Regulation)

This position is regular full time non-exempt.

PRODUCTION COORDINATOR

KEY RESPONSIBILITIES:
Receive parts. Track and expedite parts shortages. Audit kits. Maintain stock room.

GENERAL NATURE OF WORK:
Work order tracking. Parts coordination.

EDUCATION & KNOWLEDGE REQUIREMENT:
High school education or equivalent job experience.

EXPERIENCE REQUIREMENTS:
5 years experience in electronics assembly environment. 1 year of experience in production. Control capacity.

SKILLS, ABILITIES AND OTHER REQUIREMENTS:

  • Able to read, write, and understand English.
  • Familiar with electronic components.
  • Good computer skills including the use of the internet, e-mial and Microsoft Office Excel.
  • Must be able to lift and transport light boxes.
  • Able to work in team environment; pay attention to details; perform work accurately and follow directions.
  • This position requires U.S Citizenship or permanent residency to meet ITAR (International Traffic in Arms Regulation)

This position is regular full time non-exempt.

DRY FILM OPERATOR

KEY RESPONSIBILITIES:
Clean, load and operate dry film machines.

GENERAL NATURE OF WORK:
Load dry film on to panels; shoot images on panels; develop panels and feed panels in to hot roll machine.

EDUCATION & KNOWLEDGE REQUIREMENT:
High school education or equivalent work experience.

SKILLS, ABILITIES AND OTHER REQUIREMENTS:
Able to read, write, and understand English.

EXPERIENCE REQUIREMENT:
No prior experience required.

ABILITIES (PHYISCAL, MENTAL APTITUDES):
Able to work in team environment; pay attention to details; perform work accurately and in detail; and follow directions.

OTHER:
This position requires US citizenship or Permanent Residency to meet ITAR (International Traffic in Arms Regulations)

SCREENING OPERATOR

KEY RESPONSIBILITIES:
Coat and apply LPI and legend.

GENERAL NATURE OF WORK:
Clean panels coming in from Quality Control department; coat panels with solder mask; apply image to panel; develop panel; shoot legend screens and apply legend.

Positions available on both Day shift and Swing shift.
Day shift 6:00am – 2:30pm
Swing shift 2:30pm – 11:00pm
Work schedules can be modified upon request

EDUCATION & KNOWLEDGE REQUIREMENT:
High school education or equivalent work experience.

SKILLS, ABILITIES AND OTHER REQUIREMENTS:
Able to read, write, and understand English.
Able to read and understand blue prints.
Must have 20/20 vision with or without corrective lenses.
Must be able to use a lighted magnifier and microscope.
Able to work in team environment; pay attention to details; perform work accurately and in detail; and follow directions.

This position requires U.S Citizenship or permanent residency to meet ITAR (International Traffic in Arms Regulation)

EXPERIENCE REQUIREMENT:
1-2 years minimum experience in printed circuit board manufacturing industry.

ABILITIES (PHYISCAL, MENTAL APTITUDES):
Able to work in team environment; pay attention to details; perform work accurately and in detail; and follow directions.

OTHER:
This position requires US citizenship or Permanent Residency to meet ITAR (International Traffic in Arms Regulations)

ELECTROPLATED COPPER PLATING OPERATOR

KEY RESPONSIBILITIES:
Conduct all Copper Electroplating operations to product according to customer specifications. Keep all tanks at optimum performance according to chemical manufactures/company requirements.

GENERAL NATURE OF WORK:
Rack panels then clean panels through a chemical clean tank line. Copper plate panels and then dip in water rinse tank. Tin plate panels and then dip in water rinse tank.  Unrack panels and move to the next department.

KNOWLEDGE & KNOWLEDGE REQUIREMENTS:
None.

SKILL REQUIREMENTS:
Able to read and understand English; able to understand blueprints and all other plating requirements.

EXPERIENCE REQUIREMENT:
No prior experience required.

ABILITIES (PHYISCAL, MENTAL APTITUDES):
Able to work in team environment; pay attention to details; perform work accurately and in detail; and follow directions.

OTHER:
This position requires US citizenship or Permanent Residency to meet ITAR (International Traffic in Arms Regulations)

ASSEMBLY Q.C. INSPECTOR

KEY RESPONSIBILITIES:
Perform final visual inspection of printed circuit assemblies; including components and soldering, per B.O.M. and actual drawings.

GENERAL NATURE OF WORK:
Inspection to be done under magnifier and microscope. Prepare products for shipment per schedule. Perform various assembly tasks as required.

EDUCATION & KNOWLEDGE REQUIREMENT:
High school education or equivalent job experience.

EXPERIENCE REQUIREMENTS:
3 years minimum experience in printed circuit assembly with 1 year emphasis.

SKILLS, ABILITIES AND OTHER REQUIREMENTS:

  • Able to read, write, and understand English.
  • Must be familiar with IPC-610 (assembly) and J-STD-001 (soldering) requirements.
  • Must have 20/20 vision with or without corrective lenses.
  • Must be able to use a lighted magnifier and microscope.
  • Able to work in team environment; pay attention to details; perform work accurately and in detail; and follow directions.
  • This position requires U.S Citizenship or permanent residency to meet ITAR (International Traffic in Arms Regulation)

This position is regular full time non-exempt.

DRILL OPERATOR

KEY RESPONSIBILITIES:
Set up, load, unload, clean and maintain drill machines.

GENERAL NATURE OF WORK:
Drill pc boards.

EDUCATION REQUIREMENT:
High school education or equivalent job experience.

EXPERIENCE REQUIREMENTS:
No prior experience required

SKILLS, ABILITIES AND OTHER REQUIREMENTS:

  • Able to read, write, and understand English.
  • Basic data input computer skills
  • Able to work in team environment; pay attention to details; perform work accurately and in detail; and follow directions.
  • This position requires U.S Citizenship or permanent residency to meet ITAR (International Traffic in Arms Regulation)
QUALITY CONTROL INSPECTOR

KEY RESPONSIBILITIES/GENERAL NATURE OF WORK:
Inspect printed circuit boards to ensure product is within quality standards and specifications.

EDUCATION & KNOWLEDGE REQUIREMENT:
High school education or equivalent job experience.

EXPERIENCE REQUIREMENTS:
2+ years of related work experience.

SKILLS, ABILITIES AND OTHER REQUIREMENTS:

  • Able to read blue prints and specifications.
  • Basic computer skills.
  • Must have 20/20 vision with or without corrective lenses.
  • Must be able to use magnifying rings, microscopes and measuring reticles.
  • Able to work in team environment; pay attention to details; perform work accurately and in detail; and follow directions.
  • This position requires U.S Citizenship or permanent residency to meet ITAR (International Traffic in Arms Regulation)
CAM OPERATOR

KEY RESPONSIBILITIES:
Input, edit and panelize CAM data. Interface with customers to resolve data problems. Create and fill out pre-production traveler for rigid planning.

GENERAL NATURE OF WORK:
Edit gerber data to make circuit layers manufacturable, create drill file, route file as needed to manufacture printed circuit boards.

EDUCATION & KNOWLEDGE REQUIREMENT:
High school education or equivalent work experience, 2+ years of Valor software experience.

EXPERIENCE REQUIREMENTS:
2+ years CAM experience.

SKILLS, ABILITIES AND OTHER REQUIREMENTS:

  • Must be able to read, write, speak and understand English fluently
  • Be able to do basic math and able to use computer without assistance.
  • Must be able to sit for long periods of time
  • Must be able to work in open office environment.
  • Work closely with sales and customers.
  • This position requires US citizenship or Permanent Residency to meet ITAR (International Traffic in Arms Regulations)
PLANNER-FLEX

KEY RESPONSIBILITIES:
Review blue prints and product specifications to accurately generate shop traveler and work order file for new jobs.

GENERAL NATURE OF WORK:
Interface with customer, sales department and other manufacturing personnel as needed. Complete shop traveler using Bacon JTS software.

EDUCATION & KNOWLEDGE REQUIREMENT:
High school education or equivalent job experience. Knowledge of flex processes.

EXPERIENCE REQUIREMENTS:
2+ years planning experience.

SKILLS, ABILITIES AND OTHER REQUIREMENTS:

  • Must be able to read, write, speak and understand English.
  • Must be able to do basic math functions.
  • Must be able to work in open office environment.
  • This position requires US citizenship or Permanent Residency to meet ITAR (International Traffic in Arms Regulations)
SALES ADMINISTRATIVE ASSISTANT

KEY RESPONSIBILITIES:
Type, file, answer phone calls, answer emails, and perform other jobs critical to office operations. Process orders submitted by Sales staff, checks orders for accuracy and completeness, create shipping labels and other office documents.

GENERAL NATURE OF WORK:
Assist and interact with a range of people while performing their job. Able to provide clear and accurate information in both verbal and written forms.

EDUCATION & KNOWLEDGE REQUIREMENT:
High school education or equivalent work experience.

EXPERIENCE REQUIREMENTS:
2 years general office experience.

SKILLS, ABILITIES AND OTHER REQUIREMENTS:

  • Basic telephone and computer skills.
  • Must be able to read, write, speak and understand English.
  • Excellent interpersonal skills.
  • Excellent customer service skills.
  • Able to work in a team environment.
  • Able to prioritize and deal with demands coming from various directions.
  • Must have an eye for details.
  • Able to follow directions.
PROCESS ENGINEER

KEY RESPONSIBILITIES:
Process development, process improvement and process monitoring to improve manufacturing quality.

GENERAL NATURE OF WORK:
Evaluate and improve processes to ensure product conformity; trouble shoot manufacturing deficiences and provide solutions to prevent reoccurrences; provide technical support to manufacturing and quality.

EDUCATION & KNOWLEDGE REQUIREMENT:
High school diploma or equivalent; or related job experience. Knowledge of plating requirements, in-process quality control, micro-section analysis, wet and dry processes and ISO procedures.

EXPERIENCE REQUIREMENTS:
5+ years of related work experience working in different areas of printed circuit board manufacturing.

SKILLS, ABILITIES AND OTHER REQUIREMENTS:

  • Analytical and process problem solving skills.
  • Able to work in team environment
  • Pay attention to details
  • Perform work accurately and in detail
  • This position requires US citizenship or Permanent Residency to meet ITAR (International Traffic in Arms Regulations

This position is regular full time exempt.

Cirexx offers a competitive compensation package including base salary, health, retirement, and paid vacation. Cirexx International is an equal opportunity employer.

Interested candidates please email your résumé and cover letters to Renee Van Tine at [email protected]

Contact Information
Human Resources Department
Cirexx International, Inc.
3391 Keller Street
Santa Clara, CA 95054